Publications

 
Journal Articles Published or Accepted for Publication Geubelle, P. H. and Knauss, W. G. (1994) “Crack propagation at and near bimaterial interfaces: linear analysis”. ASME J. Appl. Mech., 61, 560-566. Geubelle, P. H. and Knauss, W. G. (1995) “Crack propagation at and near bimaterial interfaces under general loading: nonlinear analysis”. ASME J. Appl. Mech., 62:3, 601-606. Geubelle, P. H. and Knauss, W. G. (1994) “Finite strains at the tip of a crack in a sheet of hyperelastic material: 1. Homogeneous case”. J. Elasticity, 35, 31-98. Geubelle, P. H. and Knauss, W. G. (1994) “Finite strains at the tip of a crack in a sheet of hyperelastic material: 2. Special bimaterial cases”. J. Elasticity, 35, 99-137. Geubelle, P. H. and Knauss, W. G. (1994) “Finite strains at the tip of a crack in a sheet of hyperelastic material: 3. General bimaterial case”. J. Elasticity, 35, 139-174. Geubelle, P. H. and Knauss, W. G. (1995) “A note related to energy-release rate computations for kinking interface cracks”. ASME J. Appl. Mech., 62:1, 266-267. Geubelle, P. H. (1995) “Finite deformation effects in homogeneous and interfacial fracture”. Int. J. Solids Structures, 36:6/7, 1003-1016. Geubelle, P. H. and Rice, J. R. (1995) “A spectral method for 3D elastodynamic fracture problems”. J. Mech. Phys. Solids, 43:11, 1791-1824. Morrissey, J. W. and Geubelle, P. H. (1997) “A numerical scheme for mode III dynamic fracture problems”. Int. J. Numer. Meth. Eng., 40, 1181-1196. Geubelle, P. H., Danyluk, M. J. and Hilton, H. H. (1997) “Dynamic mode III fracture in viscoelastic media”. Int. J. Solids Structures, 35, 761-782. Geubelle, P. H. and Breitenfeld, M. S. (1997) “Numerical analysis of dynamic debonding under anti-plane shear loading”. Int. J. Fracture, 85, 265-282. Danyluk, M. J., Geubelle, P. H. and Hilton, H. H. (1998) “2D and 3D dynamic fracture in viscoelastic media”. Int. J. Solids Structures, 35:28-29, 3831-3853. Geubelle, P. H. (1997) “A numerical method for elastic and viscoelastic dynamic fracture problems in homogeneous and bimaterial systems”. Computational Mechanics, 20:1-2, 20-25. Breitenfeld, M. S. and Geubelle, P. H. (1998) “Numerical analysis of dynamic debonding under 2D in-plane and 3D loading”. Int. J. Fracture, 93, 13-38. Geubelle, P. H. and Baylor, J. (1998) “Impact-induced delamination of composites: a 2D simulation”. Composites B, 29B, 589-602. Breitenfeld, M. S. and Geubelle, P. H. (2000) “Parallel implementation of a spectral scheme for the simulation of 3D dynamic fracture events”. Int. J. High Performance Computing Appl., 14:1, 26-38. Lin, G., Geubelle, P. H. and Sottos, N. R. (2001) “Simulation of fiber debonding with friction in a model composite pushout test”. Int. J. Solids Structures, 38:46-47, 8547-8562. Geubelle, P. H. and Kubair, D. (2001) “Intersonic crack propagation in homogeneous media under shear-dominated loading: Numerical analysis”. J. Mech. Physics Solids, 49:3, 571-587. Zhu Q., Li M., Geubelle, P.H. and Tucker, C. L. (2001) “Dimensional accuracy of thermoset composites: simulation of process-induced residual stresses”. J. Composite Materials, 35:24, 2171-2205. Li, M., Zhu, Q., Geubelle, P. H. and Tucker, C. L. (2001) “Optimal curing for thermoset matrix composites: thermomechanical considerations”. Polymer Composites, 22,118-131. Zhu Q. and Geubelle, P.H. (2002) “Dimensional accuracy of thermoset composites: shape optimization”. J. Composite Materials, 36:6, 647-672. Wood, B., Loth, E. and Geubelle, P. H. (2002) “A numerical methodology for an aeroelastic supersonic viscous flow”. J. Fluid and Structures, 16:8, 1127-1144. White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N. and Viswanathan, S. (2001) “Autonomic healing of polymer composites”. Nature, 409, 794-797. Hwang, C. and Geubelle, P. (2000) “A spectral scheme to simulate dynamic fracture problems in composites”. Computer Modeling in Eng. & Science, 1:4, 45-56. Li Z., Bi X., Lambros J. and Geubelle P. H. (2002) “Dynamic fiber debonding and frictional push-out in model composite systems: experimental observations”. Experimental Mechanics, 42:4, 417-425. Kubair, D., Geubelle, P. H. and Huang, Y. (2002) “Intersonic crack propagation in homogeneous media under shear-dominated loading: Theoretical analysis”. J. Mech. Phys. Solids, 50:8, 1547-1564. Kubair, D., Geubelle, P. H. and Huang, Y. (2003) “Analysis of a rate-dependent cohesive model for dynamic crack propagation”. Eng. Fracture Mech., 50:5, 685-704. Bi, X., Li, Z., Geubelle, P. H. and Lambros, J. (2002) “Dynamic fiber debonding and frictional push-out in model composite systems: numerical simulations”. Mechanics of Materials, 34, 433-446. Zhu, Q., Shrotriya, P., Sottos, N. R. and Geubelle, P. H. (2003) “Three-dimensional simulation of viscoelastic response of a woven composite substrate for multilayer PCB”. Composite Science & Technology, 63:13, 1971-1983. Zhang, P., Huang, Y., Geubelle, P. H., Klein, P. A. and Hwang, K. C. (2002) “The elastic modulus of single-wall carbon nanotubes: a continuum analysis incorporating interatomic potentials”. Int. J. Solids Structures, 39, 3893-3906. Zhang P., Huang Y., Geubelle P. H., and Hwang K. C. (2002) “On the continuum modeling of carbon nanotubes”. Acta Mechanica Sinica, 18:5, 528-536. Kubair, D. and Geubelle, P. H. (2003) “Comparative analysis of extrinsic and intrinsic cohesive models of dynamic fracture”. Int. J. Solids Structures, 40:15, 3853-3868. Maiti, S. and Geubelle, P. H. (2002) “Mesoscale modeling of dynamic fracture of ceramic materials”. Computer Modeling in Eng. & Science, 5:2, 91-101. Jiang, H., Zhang, P., Liu, B., Huang, Y., Geubelle, P. H., Gao, H. and Hwang, K. C. (2003) “The effect of nanotube radius on the constitutive model for carbon nanotubes”. Computational Material Science, 28:3-4, 429-442. Kubair, D., Geubelle, P. H. and Lambros, J. (2005) “Asymptotic analysis of a mode III stationary crack in a ductile functionally graded material”. J. Applied Mechanics, 72:4, 461-467. Maiti, S., Rangaswamy, K. and Geubelle, P. H. (2005) “Mesoscale analysis of dynamic fragmentation of ceramics under tension”. Acta Materialia, 53:3, 823-834. Zhang, P., Jiang, H., Huang Y., Geubelle, P. H. and Hwang, K. C. (2004) “An atomistic-based continuum theory for carbon nanotubes: analysis of fracture nucleation”. J. Mech. Physics Solids, 52:5, 977-998. Maiti, S. and Geubelle, P. H. (2005) “A cohesive model for fatigue failure of polymers”. Eng. Fracture Mechanics, 72:5, 691-708. Kandula, S., Abanto-Bueno, J., Geubelle, P. H. and Lambros, J. (2005) “Cohesive modeling of dynamic fracture of functionally graded materials”. Int. J. Fracture, 132, 275-296. Hendrickx, J., Geubelle, P. H. and Sottos, N. R. (2005) “A spectral scheme to simulate the mode III dynamic delamination of thin films”. Eng. Fracture Mech., 72:12, 1866-1891. Maiti, S. and Geubelle, P. H. (2006) “Cohesive modeling of fatigue crack retardation in polymers: Crack closure effect”. Eng. Fracture Mech., 73:1, 22-41. Tan, H., Liu, C., Huang, Y., and Geubelle, P.H. (2006) “Effect of nonlinear interface debonding on the constitutive model of composite materials”. International Journal for Multiscale Computational Engineering 4, 147-167. Tan, H., Huang, Y., Liu, C. and Geubelle, P. H. (2005) “The Mori-Tanaka method for composite materials with nonlinear interface debonding”. Int. J. Plasticity, 21:10, 1890-1918. Tan, H., Liu, C., Huang, Y. and Geubelle, P. H. (2005) “The cohesive law for the particle/matrix interfaces in high explosives”. J. Mech. Physics Solids, 53:8, 1892-1917. Jaiman, R. K., Jiao, X., Geubelle, P. H. and Loth, E. (2005) “Assessment of conservative load transfer for fluid-solid interface with non-matching meshes”. Int. J. Numer. Meth. Eng., 64, 2014-2038. Matous, K. and Geubelle, P. H (2006) “Multiscale analysis of particle debonding in reinforced elastomers subjected to finite deformation”. Int. J. Numer. Meth. Eng., 65, 190-223. Kandula, S., Abanto-Bueno, J., Geubelle, P. H. and Lambros, J. (2006) “Cohesive modeling of quasi-static fracture in functionally graded materials”. J. Applied Mechanics, 73, 783-791. Maiti, S., Shankar, C., Geubelle, P. H. and Kieffer, J. (2006) “Continuum- and molecular-level modeling of fatigue crack propagation in self-healing composite”. J. Eng. Mater. Technology, 128:4, 595-602. Jaiman, R. K., Jiao, X., Geubelle, P. H. and Loth, E. (2006) “Conservative load transfer along curved fluid-solid interface with non-matching meshes”. J. Computational Physics, 218:1, 372-397. Matous, K., Inglis, H. M., Gu, X., Rypl, D., Jackson, T. L. and Geubelle, P. H. (2007) “Multiscale modeling of solid propellants: From particle packing to grain failure.” Composites Science & Technology, 67:7-8, 1694-1708. DOI: 10.1016/j.compscitech.2006.06.017. Dantuluri, V., Maiti, S., Geubelle, P. H., Patel, R. and Kilic, H. (2007) “Cohesive modeling of delamination in Z-pin reinforced composite laminates.” Composites Science & Technology, 67:3-4, 616-631. Matous, K. and Geubelle, P. H (2006) “Finite element formulation for modeling particle debonding in reinforced elastomers subjected to finite deformations”. Computer Methods in Applied Mechanics and Engineering, 196:1-3, 620-633. Inglis, H., Matous, K., Tan, H., Geubelle, P. H. and Huang, Y. (2007) “Cohesive modeling of dewetting in particulate composites: micromechanics vs. multiscale finite element analysis”. Mech. Materials, 39:6, 580-595. DOI: 10.1016/j.mechmat.2006.08.008. Tan, H., Huang, Y., Liu, C., Ravichandran, G., Inglis, H. M. and Geubelle, P. H. (2007) “The uniaxial tension of particulate composite materials with nonlinear interface debonding.” Int. J. Solids Struct., 44:6, 1809-1822. DOI: 10.1016/j.ijsolstr.2006.09.004. Roe, B., Haselbacher, A. and Geubelle, P. H. (2007) “Stability of explicit coupled thermal simulations on a moving grid”. Int. J. Numer. Methods in Fluids, 54, 1097-1117. DOI: 10.1002/fld.1416. Nittur, P., Maiti, S. and Geubelle, P. H. (2008) “Grain-level analysis of dynamic fragmentation of ceramics under multi-axial compression”. J. Mech. Phys. Solids, 56:3, 993-1017. DOI: 10.1016/j.jmps.2007.06.007. Mangala, S., Wilmarth, T., Chakravorty, S., Choudhury, N., Kale, L. V. and Geubelle, P. H. (2008) “Parallel adaptive simulations of dynamic fracture events”. Engineering with Computers, 24:4, 341-358. DOI: 10.1007/s00366-007-0082-x. Matous, K., Kulkarni, M. G. and Geubelle, P. H. (2008) “Multiscale cohesive failure modeling of heterogeneous adhesives”. J. Mech. Phys. Solids, 56:4, 1511-1533. DOI: 10.1016/j.jmps.2007.08.005. Kumar, N. C., Matous, K. and Geubelle, P. H. (2008) “Reconstruction of periodic unit cells of multimodal random particulate composites using genetic algorithms”. Computational Materials Science, 42:2, 352-367. DOI: 10.1016/j.commatsci.2007.07.043. Roe, B., Jaiman, A., Haselbacher, A. and Geubelle, P. H. (2008) “Combined interface boundary condition method for coupled thermal simulations”. Int. J. Numer. Methods in Fluids, 57:3, 329-354. DOI: 10.1002/fld.1637. Tran, P., Kandula, S., Geubelle, P. H. and Sottos, N. R. (2008) “Hybrid spectral/finite element analysis of dynamic delamination of patterned thin films.” Eng. Fracture Mech., 75:14, 4217-4233. DOI: 10.1016/j.engfracmech.2008.03.006. Kandula, S. S. V., Hartfield, C. D., Geubelle, P. H. and Sottos, N. R. (2008) “Adhesion strength measurement of polymer dielectric interfaces using laser spallation technique.” Thin Solid Films, 516:21, 7627-7635. DOI: 10.1016/j.tsf.2008.05.033. Brassart, L., Inglis, H. M., Delannay, L., Doghri, I. and Geubelle, P. H. (2009) “An extended Mori-Tanaka homogenization scheme for finite strain modeling of debonding in particle-reinforced elastomers”. Computational Materials Science, 45, 611-616. DOI: doi:10.1016/j.commatsci.2008.06.021. Inglis, H., Geubelle, P.H. and Matous, K. (2008) “Boundary condition effects on multiscale analysis of damage localization.” Phil. Magazine, 88:16, 2373-2397. DOI: 10.1080/14786430802345645. Aragón, A. M., Wayer, J. K., Geubelle, P. H., Goldberg, D. E. and White, S. R. (2008) “Design of microvascular flow networks using multi-objective genetic algorithms”. Comp. Methods Applied Mech. Eng., 197, 4399-4410. DOI: 10.1016/j.cma.2008.05.025. Subhash, G., Maiti, S., Geubelle, P. H. and Ghosh, D. (2008) “Recent advances in dynamic indentation fracture, impact damage and fragmentation of ceramics”. J. Amer. Ceramic Society, 91 (9), 2777-2791. DOI: 10.1111/j.1551-2916.2008.02624.x. Srinivasan, K., Matous, K. and Geubelle, P. H. (2008) “Generalized finite element method for modeling nearly incompressible bimaterial hyperelastic solids”. Comp. Meth. Applied Mechanics Engg., 197, 4882-4893. DOI: 10.1016/j.cma.2008.07.014 Kulkarni, M., Geubelle, P. H. and Matous, K. (2009) “Multi-scale modeling of heterogeneous adhesives: Effect of particle decohesion”. Mech. Mater., 41, 573-583. DOI:10.1016/j.mechmat.2008.10.012. Wei, Y. and Geubelle, P. H. (2008) “A comparative study of GLS finite elements for solving incompressible fluid flows”. IJNMF, in press. DOI: 10.1002/fld.1416. Kitey, R., Geubelle, P. H. and Sottos, N. R. (2009) “Mixed-mode interfacial adhesive strength of a thin film on an anisotropic substrate”. J. Mech. Phys. Solids, 57:1, 51-66. DOI: 10.1016/j.jmps.2008.10.002. Dooley, I., Mangala, S., Kale, L. and Geubelle, P. H. (2008) “Parallel simulations of dynamic fracture using extrinsic cohesive elements.” J. Scientific Computing, in press. DOI: 10.1007/s10915-008-9254-0. Kandula, S. S. V., Tran, P., Geubelle, P. H. and Sottos, N. R. (2008) “Dynamic delamination of patterned thin films”. Appl. Physics Letters, 93, 261902-1-3. DOI: 10.1063/1.3056639. Aragón, A. M., Duarte, C. A. and Geubelle, P. H. (2009) “Generalized finite element enrichment functions for discontinuous gradient fields”. IJNME. DOI: 10.1002/nme.2772. Wu, W., Hansen, C.L., Aragón, A.M., Geubelle, P.H., White, S.R. and Lewis, J.A. (2009) “Direct-write assembly of biomimetic microvascular networks for efficient fluid transport.” To appear in Soft Matter Communication. Tran, P., Kandula, S. S. V., Geubelle, P. H. and Sottos, N. R. “Dynamic delamination of patterned thin films: A numerical study.” (2009) To appear in Int. J. Fracture. DOI: 10.1007/s10704-010-9460-2. Olugebefola, S. C., Aragón, A. M., Hansen, C. J., Hamilton, A. R., Kozola, B. D., Geubelle, P. H., Lewis, J. A., Sottos, N. R., and White, S. R. (2009) “Polymer-microvascular network composites.” To appear in J. Composite Materials. Jaiman, R., Geubelle, P. H., Loth, E. and Xiao, X. (2009) “Combined interface boundary condition method for unsteady fluid-structure interaction”. To appear in Comp. Meth. Applied Mechanics Engg. Kulkarni, M. G., Matous, K. and Geubelle, P. H. (2010) “Coupled multi-scale cohesive modeling in heterogeneous adhesives.” To appear in International Journal for Numerical Methods in Engineering. White, S. R. and Geubelle, P. H. (2010) “Get ready for repair-and-go.” Nature Nanotechnology. Vol. 5, April 2010, 247-248. Conference Proceedings Articles and Technical Reports Geubelle, P. H. and Knauss, W. G. (1993) “Crack propagation in homogeneous and bimaterial sheets under general in-plane loading : Nonlinear analysis”, in “Ultrasonic Characterization and Mechanics of Interfaces”, S. I. Rokhlin, S. K. Datta and Y. D. S. Rajapakse, eds; Proceeding of the 1993 ASME Winter Annual Meeting in New Orleans, LA; Nov.28-Dec.3, 1993. Geubelle, P. H. (1994) “Implementation of a 3D elastodynamic boundary-integral code on the CM-5”. Mech-240 Report, Division of Applied Sciences, Harvard University. Geubelle, P. H., Danyluk, M. J. and Hilton, H. H. “Dynamic Mode 3 Fracture in Viscoelastic Media.” Report AAE 96-03, UILU ENG 96-0503. Geubelle, P. H. and Breitenfeld, M. S. “Numerical analysis of dynamic debonding under anti-plane shear loading.” Report AAE 96-12, UILU ENG 96-0512. Geubelle, P. H. “A numerical method for elastic and viscoelastic dynamic fracture problems in homogeneous and bimaterial systems.” Report AAE 96-14, UILU ENG 96-0514. Jung, D., Hegeman, A., Sottos, N. R., Geubelle, P. H. and White, S. R. (1997) “Self-healing composites using embedded micro-spheres,” Composite and Functionally Graded Materials, Jacob, K., Katsube, N., and Jones, W., Eds., Vol. MD-80, in Proceedings of the ASME International Mechanical Engineering Conference and Exposition, pp. 265-275. White, S. R., Geubelle, P. H. and Tucker, C. L. (1998) “Process optimization for dimensional accuracy for polymer composites.” 1998 NSF Annual Report, Grant No. DMI-9610382, June 1998. White, S. R., Geubelle, P. H. and Tucker, C. L. (1999) “Process optimization for dimensional accuracy for polymer composites.” 1999 NSF Design and Manufacturing Grantee's Conference, Jan. 5-8, 1999, Long Beach, CA. Wood, B., Loth, E., and Geubelle, P. H. (1999) “Mesoflaps for aeroelastic transpiration for SBLI control”, 37th Aerospace Sciences Meeting, Reno NV, January 1999; AIAA 99-0614. Wood, B., Loth, E., and Geubelle, P. H. (1999) “Shock/boundary-layer interaction control with aeroelastic transpiration”. 3rd ASME/JSME Joint Fluids Engineering Conference, San Francisco CA, July 17-21, 1999; FEDSM99-6924. Geubelle, P. H., Lin, G. and Sottos, N. R. (1999) “Simulation of a fiber pushout test in model polyester/epoxy composite”. Proceedings of ICCM-12, Paris, July 5-9, 1999. White, S. R., Geubelle, P. H. and Tucker, C. L. (1999) “Process optimization for dimensional accuracy for polymer composites.” 1999 NSF Annual Report, Grant No. DMI-9610382, June 1999. Geubelle, P. H., Breitenfeld, M. S., Kubair, D. and Hwang, C. (2000) “Simulation of fundamental dynamic fracture problems using a spectral scheme”. In Advances in Computational Engineering & Sciences. Edited by S. N. Atluri and F. W. Brust. Tech. Science Press. Proceedings of ICES2K held in Annaheim, CA, in August 2000. Zhu, Q. and Geubelle, P. H. (2000) “Effects of the manufacturing process on the dimensional accuracy of thermoset composites”. Proceedings of ASME IMECE 2000 in Orlando, November 2000. Hwang, C. and Geubelle, P. H. (2000) “Subsonic and intersonic crack propagation in unidirectional and cross-ply composites”. Proceedings of ASME IMECE 2000 in Orlando, November 2000. Wood, B., Loth, E., Geubelle, P. H. and McIlwain, S. (2000) “A numerical methodology for an aeroelastic SBLI Flow”. 38th Aerospace Sciences Meeting, Reno, NV, 10-13 January 2000. Paper AIAA 2000-0552. Gefroh, D. L., Hafenrichter, E. S., McIlwain, S. T., Loth, E., Dutton, C. J. and Geubelle, P. H. (2000) “Simulation and Experimental Analysis of a Novel SBLI Flow Control System”. AIAA Fluid 2000 Conference, 19-22 June 2000, Denver, CO. Paper AIAA 2000-2237. Geubelle, P. H., Hwang, C., Fiedler, R., Breitenfeld, M. S. and Haselbacher, A. (2001) “Simulation of dynamic fracture events in solid propellant rockets”. 37th AIAA/ASME/SAE/ASEE JPC Conference and Exhibit, July 8-11, 2001. Paper AIAA 2001-3953. Lambros, J., Bi X. and Geubelle, P. H., “The mechanics of dynamic fiber push-out: experimental and numerical study”, IMECE 2001, New York, NY, November 2001. Lambros, J., Bi, X. and Geubelle, P. H. “High-speed debonding and frictional sliding in composite systems: experimental observations and numerical simulations.” Proceedings of ICF 10. Honolulu, December 2-7, 2001. Geubelle, P. H. and Maiti, S. “Simulation of damage mechanisms in high-speed grinding of structural ceramics.” Proceedings of ICF 10. Honolulu, December 2-7, 2001. Hwang, C., Massa, L., Fiedler, R. and Geubelle, P. H. “Simulation of convective burning and dynamic fracture in solid propellants.” 38th AIAA/ASME/SAE/ASEE JPC Conference and Exhibit, July 7-10, 2002. Paper AIAA 2002-4342. Fiedler, R. A., Breitenfeld, M. S., Jiao, X., Haselbacher, A. Geubelle, P. H., Guoy, D. and Brandyberry, M. “Simulations of slumping propellant and flexing inhibitors in solid propellant rocket motors.” 38th AIAA/ASME/SAE/ASEE JPC Conference and Exhibit, July 7-10, 2002. Paper AIAA 2002-4341. Maiti, S., Rangaswamy, K. and Geubelle, P. H. “Fragmentation of ceramics in rapid expansion mode.” In Fracture Mechanics of Ceramics, pp. 353-365. Proceedings of the 8th Conference of the Fracture Mechanics of Ceramics. Houston, TX. February 25-28, 2003. Edited by R. C. Bradt, D. Munz, M. Sakai and K. W. White. Geubelle, P. H., Maiti, S. and Rangaswamy, K. “Mesoscale modeling of fragmentation of ceramics under dynamic compressive loading. Proceedings of ICF11, Turin, Italy, March 2005. Geubelle, P. H., Hendrickx, J. and Sottos, N.R. « Spectral scheme for analysis of dynamic delamination of a thin film.” . Proceedings of ICF11, Turin, Italy, March 2005. Geubelle, P.H., Dantuluri, V., Koppaka, S.B. and Phinney, L. « Cohesive modeling of adhesion reduction of MEMS cantilevers through laser heating”. Proceedings of ICF11, Turin, Italy, March 2005. White, S.R., Maiti, S., Jones, A., Brown, E.N., Sottos, N.R. and Geubelle, P.H. « fatigue of self-healing polymers: multiscale analysis and experiments”. Proceedings of ICF11, Turin, Italy, March 2005. Matous, K., Inglis, H. M., Gu, X., Jackson, T., Rypl, D. and Geubelle, P. H. "Multiscale Damage Modeling of Solid Propellants: Theory and Computational Framework”. 41st AIAA/ASME/SAE/ASEE JPC Conference and Exhibit, July 10-13, 2005. Tucson, AZ. Paper AIAA 2005-4347. Tan, H., Huang, Y., Geubelle, P. H., Liu, C. and Breitenfeld, M. S. “An Energy Approach to a Micromechanics Model Accounting for Nonlinear Interface Debonding”. 41st AIAA/ASME/SAE/ASEE JPC Conference and Exhibit, July 10-13, 2005. Tucson, AZ. Paper AIAA-2005-3995. Jaiman, R., Geubelle, P. H., Loth, E. and Jiao, X. M. “Stable and accurate loosely-coupled scheme for unstead fluid/structure interaction”. Paper AIAA-07-334. AIAA Conference, Reno, January 2007. Aragón, A. M., Hansen, C. J., Wu, W., Geubelle, P. H., Lewis, J. and White, S. R. “Computational design and optimization of a biomimetic self healing/cooling material.” In Behavior and Mechanics of Multifunctional and Composite Materials 2007, Edited by M. J. Dapino. Proceedings of SPIE, 6526. San Diego, CA, March 2007. Geubelle, P. H., Inglis, H. M., Kramer, J. D., Patel, J. J., Kumar, N. C. and Tan, H. “Multiscale modeling of dewetting damage in highly filled particulate composites”. Proceedings of the 2006 Multiscale and Functionally Graded Materials Conference, October 15-18, 2006, Hawaii. DOI: 10.1063/1.2896776. Geubelle, P. H., Maiti, S., Kulkarni, M. and Matous, K. “Multiscale cohesive modeling of fatigue response of a self-healing composite”. First International Conference on Self-Healing Materials, Noordwijk, Netherlands, April 2007. Kandula, S. S. V., Geubelle, P. H. and Sottos, N. R. “Dynamic adhesion test to measure thin film interface fracture toughness”. Society of Experimental Mechanics XI, Orlando, FL, June 2-5, 2008. Aragón, A., Geubelle, P.H. and White, S.R. “Bio-mimetic microvascular material for autonomic healing, cooling and sensing applications”. Proceedings of the US-Korea Workshop on Bio-Inspired Sensor Technology and Infrastructure Monitoring. June 2008. Jeju, Korea. Tran, P., Kandula, S., Geubelle, P. H. and Sottos, N. R. “Dynamic delamination testing of patterned thin films: a combined experimental and numerical study”. Proceedings of the 12th International Conference on Fracture, Ottawa, July 12-17, 2009. Ostoich C., Bodony, D. J., Geubelle, P. H., ``Coupled computational fluid-thermal investigation of hypersonic flow over a quilted dome surface,'' Bull. Amer. Phys. Soc., Vol 54(19), 2009. Sucheendran M., Bodony, D. J., Geubelle, P. H., ``Structural-acoustic interaction of a cavity-backed, clamped, elastic plate with sound in a duct,'' Bull. Amer. Phys. Soc., Vol 54(19), 2009. M.Sc. and Ph.D. Theses DANYLUK, M. J. Visco-elastodynamic fracture using a spectral method. M. S. Thesis. P. H. Geubelle, adviser (1996). BAYLOR, J. S. A numerical simulation of impact-induced damage of composites. M. S. Thesis. P. H. Geubelle, adviser (1997). HEGEMAN, A. J. Self-repairing polymers: repair mechanisms and micro-mechanical modeling. M. S. Thesis. S. R. White and P. H. Geubelle, advisers (1997). BREITENFELD, M. S. Simulations of dynamic failure of interfaces using a spectral method. M. S. Thesis. P. H. Geubelle, adviser (1997). WOOD, B. Aeroelastic simulations of a novel bleeding system for supersonic inlets. M. S. Thesis. P. H. Geubelle and E. Loth, advisers (1999). VISWANATHAN, S. Micromechanical modeling of self-healing polymeric composites. M. S. Thesis. P. H. Geubelle, adviser (2000). ZHU, Qi Dimensional accuracy of thermoset polymer composites: Process simulation and optimization. Ph.D. Thesis. P. H. Geubelle, adviser (2000). ZACZEK, Mariusz Adaptive cohesive volumetric finite element method for dynamic fracture simulations. M.S. Thesis. P. H. Geubelle, adviser (2001). KUBAIR, Dhirendra Cohesive modeling of dynamic fracture: rate dependence and intersonic crack motion. Ph.D. Thesis. P. H. Geubelle, adviser (2001). THOMAS, Jay Multi-scale spectral/molecular dynamics simulation of dynamic fracture in brittle materials. M.S. Thesis. P. H. Geubelle, adviser (2002). MAITI, Spandan Grain-level simulation of dynamic failure in ceramic materials. Ph.D. Thesis. P. H. Geubelle, adviser (2002). OZHKAYA, Lale Flutter analysis of a single flap system under supersonic flow. M.S. Thesis. P. H. Geubelle, adviser (2003) KANDULA, Soma Cohesive modeling of fracture in functionally graded materials. M.S. Thesis. P. H. Geubelle, adviser (2004) BI, Xiaopeng Dynamic fiber debonding and push-out in model composites. Ph.D. Thesis. P. H. Geubelle, and J. Lambros, co-advisers (2003) DANTULURI, Venkata Cohesive modeling of delamination in Z-pin reinforced composites. M.S. Thesis. P. H. Geubelle, adviser (2004) MANGALA, Sandhya Dynamic fracture simulations with adaptive mesh modification in parallel framework. M.S. Thesis. P. H. Geubelle, adviser (2006) ROE, Brad Coupled thermal simulations of fluid-structure problems. M.S. Thesis. P. H. Geubelle, adviser (2006) DEWEY, H. Heath Large-scale three-dimensional simulations of aeroelastic phenomena. M.S. Thesis. P. H. Geubelle, adviser (2006) NITTUR, Parag G. Mesoscale analysis of fragmentation of ceramics under dynamic multiaxial compression. M.S. Thesis. P. H. Geubelle, adviser (2006) KUMAR, Natarajan Genetic algorithm based reconstruction of periodic unit cells of random particulate composites. M.S. Thesis. P. H. Geubelle and K. Matous, co-advisers (2006) JAIMAN, Rajeev. Accuracy and stability of transient multiphysics simulations. Ph.D. Thesis, P. H. Geubelle and E. Loth, co-advisers (2007) KANDULA, Soma. Delamination of thin film patterns using laser-induced stress waves. Ph.D. thesis, N. R. Sottos and P.H. Geubelle, co-advisers (2008) SRINIVASAN, Karthik. Thermomechanical meso-scale modeling of combustion of heterogeneous solid propellants. Ph.D. thesis, P. H. Geubelle, K. Matous and T. Jackson, co-advisers (2008) INGLIS, Helen. Multiscale modeling of the effect of debonding on the constitutive response of heterogeneous materials. Ph.D. thesis, P. H. Geubelle, adviser (2008) PATEL, Jay. Deterministic and stochastic analysis for debonding of fibrous composites using micromechanics modeling. M.S. thesis, P. H. Geubelle, adviser (2009) KULKARNI, Mohan. Multiscale cohesive modeling of heterogeneous adhesives. Ph.D. thesis, P. H. Geubelle and K. Matous, co-advisers (2009) MS and PhD theses currently supervised ARAGON, Alejandro. Computational design of microvascular materials for active cooling. Ph.D. thesis, P. H. Geubelle, adviser TRAN, Phuong. Laser-induced delamination test protocol for thin films: modeling and experiments. Ph.D. thesis, P.H. Geubelle and N. R. Sottos, co-advisers SALVARASU, Premsainath. Role of residual stresses and inelasticity on dynamic delamination of thin films. M.S. thesis. P. H. Geubelle, adviser STUMP, Fernando. Multiscale modeling of damage in thin metallic films for MEMS applications. Ph.D. thesis. P. H. Geubelle, adviser SUSHEENDRAN, Mahesh. Structural/acoustic coupled analysis of thin-walled aerospace structures. P. H. Geubelle and D. Bodony, co-advisers BREITENFELD, M. Scot. Peridynamics analysis of fracture problems. P. H. Geubelle, adviser OSTOICH, Christopher. Multi-physics modeling of thermal/fluid/solid coupling in hypersonic vehicles. D. Bodony and P. H. Geubelle, co-advisers SMITH, Kyle. Elasto-plastic analysis of intrinsically nonlinear wave tailoring granular materials. M.S. thesis. P. H. Geubelle, adviser SOGHRATI, Soheil. Multiscale analysis and design of 3D microvascular composites for active cooling. Ph.D. thesis. P. H. Geubelle, adviser http://www.ae.illinois.edu/~geubelle/Papers/07_IJSS_1995_nonlinearelast.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/08_JMPS_1995_PHG_JRR.pdfhttp://ww.ae.illinois.edu/~geubelle/Papers/10_IJSS_1998_spectral_visco_2D.pdfhttp://ww.ae.illinois.edu/~geubelle/Papers/10_IJSS_1998_spectral_visco_2D.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/11_IJF_spectral_bima_mode3.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/11_IJF_spectral_bima_mode3.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/12_IJSS_1998_spectral_visco_3D.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/12_IJSS_1998_spectral_visco_3D.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/13_CompMech_1997_spectral.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/13_CompMech_1997_spectral.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/14_IJF_spectral_bima_3D.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/14_IJF_spectral_bima_3D.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/15_CompositesB_1998_Baylor.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/15_CompositesB_1998_Baylor.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/16_IJHPCA_2000_spectral_para.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/16_IJHPCA_2000_spectral_para.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/17_IJSS_2001_pushout_static.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/17_IJSS_2001_pushout_static.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/18_JMPS_2001_intersonic_numer.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/18_JMPS_2001_intersonic_numer.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/19_JCM_2001_Composite_manuf.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/19_JCM_2001_Composite_manuf.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/21_JCM_2002_composite_opti.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/21_JCM_2002_composite_opti.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/22_JFS_2002_aeroelastic.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/22_JFS_2002_aeroelastic.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/23_Nature_2001.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/25_EM_2002_pushout_exper.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/25_EM_2002_pushout_exper.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/26_JMPS_2002_intersonic_theory.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/26_JMPS_2002_intersonic_theory.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/27_EFM_2003_ratecoh.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/27_EFM_2003_ratecoh.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/28_MOM_2002_fiber_numeric.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/28_MOM_2002_fiber_numeric.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/29_CST_2003_visco_3Dcomposite.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/29_CST_2003_visco_3Dcomposite.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/30_IJSS_2002_nanotube.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/30_IJSS_2002_nanotube.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/32_IJSS_2003_intin_extrinsic.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/32_IJSS_2003_intin_extrinsic.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/33_CMES_2004_mesoceramic.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/34_JMPS_2004_CNT_fracture.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/34_JMPS_2004_CNT_fracture.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/35_JAM_2005_FGM_asymptotic.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/35_JAM_2005_FGM_asymptotic.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/36_ActaMat_2005_fragm_tension.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/36_ActaMat_2005_fragm_tension.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/37_JMPS_2004_CNT_fracture.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/37_JMPS_2004_CNT_fracture.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/38_EFM_2005_fatigue_cohesive.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/39_IJF_2005_FGM_Dynamic.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/39_IJF_2005_FGM_Dynamic.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/40_EFM_spectral_thinfilm.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/40_EFM_spectral_thinfilm.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/41_EFM_2005_CrackClosure.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/41_EFM_2005_CrackClosure.pdfhttp://livepage.apple.com/http://livepage.apple.com/http://www.ae.illinois.edu/~geubelle/Papers/44_JMPS_2005_cohesive_explosive.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/44_JMPS_2005_cohesive_explosive.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/45_IJNME_2005_NonMatchingFlat.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/45_IJNME_2005_NonMatchingFlat.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/46_2005_IJNME_multiscaleSP.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/46_2005_IJNME_multiscaleSP.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/47_JAM_2006_StaticFGM.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/47_JAM_2006_StaticFGM.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/49_JCP_2006_NonMatchingCurved.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/49_JCP_2006_NonMatchingCurved.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/50_CST_2007_Packing.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/50_CST_2007_Packing.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/51_CST_2007_3DComposite.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/51_CST_2007_3DComposite.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/52_CMAME_PDB.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/52_CMAME_PDB.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/53_MOM_2007_Micromechanics.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/53_MOM_2007_Micromechanics.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/54_IJSS_2007_Uniaxial3D.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/54_IJSS_2007_Uniaxial3D.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/55_IJNMF_2007_ThermalALE.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/55_IJNMF_2007_ThermalALE.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/56_JMPS_2008_FragmentationCompression.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/56_JMPS_2008_FragmentationCompression.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/57_EngWithComputers_2008_ParallelAdaptive.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/58_JMPS_2008_MultiscaleCohesive.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/58_JMPS_2008_MultiscaleCohesive.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/59_CMS_2008_PUC.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/59_CMS_2008_PUC.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/60_IJNMF_2008_CIBCThermal.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/60_IJNMF_2008_CIBCThermal.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/61_EFM_2008_ThinFilmCorner.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/61_EFM_2008_ThinFilmCorner.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/62_ThinSolidFilm_2008_Kandula.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/62_ThinSolidFilm_2008_Kandula.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/63_CompMaterSc_2009_Brassart.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/63_CompMaterSc_2009_Brassart.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/63_CompMaterSc_2009_Brassart.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/64_PhilMag_2008_BCMultiscale.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/64_PhilMag_2008_BCMultiscale.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/65_CMAME_2008_GAOptimization.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/65_CMAME_2008_GAOptimization.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/66_JACS_2008_FeatureArticle.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/66_JACS_2008_FeatureArticle.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/67_CMAME_2008_Decohesion.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/67_CMAME_2008_Decohesion.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/68_MOM_2009_adhesive.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/68_MOM_2009_adhesive.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/69_IJNMF_2008_Wei.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/69_IJNMF_2008_Wei.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/70_JMPS_2009_Kitey.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/70_JMPS_2009_Kitey.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/71_JScComp_2008_ExtrinsicCohesive.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/71_JScComp_2008_ExtrinsicCohesive.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/72_AppliedPhysicsLetter_2008.pdfhttp://www.ae.illinois.edu/~geubelle/Papers/72_AppliedPhysicsLetter_2008.pdfhttp://Papers/07_IJSS_1995_nonlinearelast.pdfshapeimage_2_link_0shapeimage_2_link_1shapeimage_2_link_2shapeimage_2_link_3shapeimage_2_link_4shapeimage_2_link_5shapeimage_2_link_6shapeimage_2_link_7shapeimage_2_link_8shapeimage_2_link_9shapeimage_2_link_10shapeimage_2_link_11shapeimage_2_link_12shapeimage_2_link_13shapeimage_2_link_14shapeimage_2_link_15shapeimage_2_link_16shapeimage_2_link_17shapeimage_2_link_18shapeimage_2_link_19shapeimage_2_link_20shapeimage_2_link_21shapeimage_2_link_22shapeimage_2_link_23shapeimage_2_link_24shapeimage_2_link_25shapeimage_2_link_26shapeimage_2_link_27shapeimage_2_link_28shapeimage_2_link_29shapeimage_2_link_30shapeimage_2_link_31shapeimage_2_link_32shapeimage_2_link_33shapeimage_2_link_34shapeimage_2_link_35shapeimage_2_link_36shapeimage_2_link_37shapeimage_2_link_38shapeimage_2_link_39shapeimage_2_link_40shapeimage_2_link_41shapeimage_2_link_42shapeimage_2_link_43shapeimage_2_link_44shapeimage_2_link_45shapeimage_2_link_46shapeimage_2_link_47shapeimage_2_link_48shapeimage_2_link_49shapeimage_2_link_50shapeimage_2_link_51shapeimage_2_link_52shapeimage_2_link_53shapeimage_2_link_54shapeimage_2_link_55shapeimage_2_link_56shapeimage_2_link_57shapeimage_2_link_58shapeimage_2_link_59shapeimage_2_link_60shapeimage_2_link_61shapeimage_2_link_62shapeimage_2_link_63shapeimage_2_link_64shapeimage_2_link_65shapeimage_2_link_66shapeimage_2_link_67shapeimage_2_link_68shapeimage_2_link_69shapeimage_2_link_70shapeimage_2_link_71shapeimage_2_link_72shapeimage_2_link_73shapeimage_2_link_74shapeimage_2_link_75shapeimage_2_link_76shapeimage_2_link_77shapeimage_2_link_78shapeimage_2_link_79shapeimage_2_link_80shapeimage_2_link_81shapeimage_2_link_82shapeimage_2_link_83shapeimage_2_link_84shapeimage_2_link_85shapeimage_2_link_86shapeimage_2_link_87shapeimage_2_link_88shapeimage_2_link_89shapeimage_2_link_90shapeimage_2_link_91shapeimage_2_link_92shapeimage_2_link_93shapeimage_2_link_94shapeimage_2_link_95shapeimage_2_link_96shapeimage_2_link_97shapeimage_2_link_98shapeimage_2_link_99shapeimage_2_link_100shapeimage_2_link_101shapeimage_2_link_102shapeimage_2_link_103shapeimage_2_link_104shapeimage_2_link_105shapeimage_2_link_106shapeimage_2_link_107shapeimage_2_link_108shapeimage_2_link_109shapeimage_2_link_110shapeimage_2_link_111shapeimage_2_link_112shapeimage_2_link_113shapeimage_2_link_114