Student research team develops hybrid rocket engine

8/25/2020 Debra Levey Larson

Written by Debra Levey Larson

A pre-pandemic photo of some of the team members - left to right: Abhiraj Majumder (AE ‘21), Chris Nielsen (Purdue Graduate Student), Connor Latham (AE ‘20), Vignesh Sella (AE ‘21), Andrew Larkey (ME ‘21), Avery Moore (AE ‘21), Avinash Rao (AE ‘21).
A pre-pandemic photo of some of the team members - left to right: Abhiraj Majumder (BS '21), Chris Nielsen (Purdue Graduate Student), Connor Latham (BS '20), Vignesh Sella (BS '21), Andrew Larkey (BS in ME '21), Avery Moore (BS '21), Avinash Rao (BS '21).
In a year defined by obstacles, a University of Illinois at Urbana-Champaign student rocket team persevered. Working together across five time zones, they successfully designed a hybrid rocket engine that uses paraffin and a novel nitrous oxide-oxygen mixture called Nytrox. The team has its sights set on launching a rocket with the new engine at the 2021 Intercollegiate Rocketry and Engineering Competition.

“Hybrid propulsion powers Virgin Galactic's suborbital tourist spacecraft and the development of that engine has been challenging. Our students are now experiencing those challenges first hand and learning how to overcome them,” said faculty adviser to the team Michael Lembeck.

Last year the team witnessed a number of catastrophic failures with hybrid engines utilizing nitrous oxide. The propellant frequently overheated in the New Mexico desert, where the IREC competition is held. Lembeck said this motivated the team to find an alternative fuel that could remain stable at temperature. Nytrox surfaced as the solution to the problem.

As the team began working on the engine this past spring semester, excitement to conduct hydrostatic testing of the ground oxidizer tank vessel quickly turned to frustration as the team lacked a safe test location.

Computer-aided design of modular test stand
Computer-aided design of modular test stand
Team leader Vignesh Sella said, “We planned to conduct the test at the U of I’s Willard airport retired jet engine testing facility. But the Department of Aerospace Engineering halted all testing until safety requirements could be met.”

Sella said they were disheartened at first, but rallied by creating a safety review meeting along with another student rocket group to examine their options.

“As a result of that meeting, we came up with a plan to move the project forward. The hybrid team rigorously evaluated our safety procedures, and had our work reviewed by Dr. Dassou Nagassou, the Aerodynamics Research Lab manager. He became a great resource for us, and a very helpful mentor.”

Sella and Andrew Larkey also approached Purdue University to draw from their extensive experience in the realm of rocket propulsion. They connected with Chris Nielson who is a graduate student and lab manager at Purdue. They did preliminary over-the-phone design reviews and were eventually invited to conduct their hydrostatic and cold-flow testing at Purdue’s Zucrow Laboratories, a facility dedicated to testing rocket propulsion with several experts in the field on-site.

“We sent a few of the members there to scout the location and take notes before bringing the whole team there for a test,” Sella said. “These meetings, relationships, and advances, although they may sound smooth and easy to establish, were arduous and difficult to attain. It was a great relief to us to have the support from the department, a pressure vessel expert as our mentor, and Zucrow Laboratories available to our team.”

Computer-aided design shows cross section of the combustion chamber
Computer-aided design shows cross section of the combustion chamber
The extended abstract, which the team had submitted much earlier to the AIAA Propulsion and Energy conference, assumed the engine would have been assembled and tested before the documentation process began. Team leader Vignesh Sella said they wanted to document hard test data but had to switch tactics in March. The campus move to online-only classes also curtailed all in-person activities, including those of registered student organizations like ISS.

“As the disruptions caused by COVID-19 required us to work remotely, we pivoted the paper by focusing on documenting the design processes and decisions we made for the engine. This allowed us to work remotely and complete a paper that wasn’t too far from the original abstract. Our members, some of whom are international, met on Zoom and Discord to work on the paper together virtually, over five time zones,” Sella said.

Sella said he and the entire team are proud of what they have accomplished and are “returning this fall with a vengeance.”

The Illinois Space Society is a technical, professional, and educational outreach student organization at the U of I in the Department of Aerospace Engineering. The society consists of 150 active members. The hybrid rocket engine team consisted of 20 members and is one of the five technical projects within ISS. The project began in 2013 with the goal of constructing a subscale hybrid rocket engine before transitioning to a full-scale engine. The subscale hybrid rocket engine was successfully constructed and hot fired in the summer of 2018, yielding the positive test results necessary to move onto designing and manufacturing a full-scale engine.

“After the engine completes its testing, the next task will be integrating the engine into the rocket vehicle,” said Sella “This will require fitting key flight hardware components within the geometric constraints of a rocket body tube and structurally securing the engine to the vehicle.”

In June 2021, the rocket will be transported to Spaceport America in Truth or Consequences for its first launch.

The paper, “Development of a Nytrox-Paraffin Hybrid Rocket Engine,” was written by Vignesh Sella, Andrew Larkey, Abhiraj Majumder, Avinash Rao, Zavar Abidi, Nicolas Rasmont, Aasheesh Randeo, Miron Liu, Avery Moore, and Michael F. Lembeck. It is published in the 2020 AIAA Propulsion & Energy conference proceedings. DOI: 10.2514/6.2020-3729

This work was supported by the U of I Student Sustainability Committee, the Office of Undergraduate Research, and the Illinois Space Society. Technical support was provided by the Department of Aerospace Engineering, the School of Chemical Sciences Machine Shop, Zucrow Laboratories and Christopher D. Nilsen at Purdue University, Stephen A. Whitmore of Utah State University, and Dassou Nagassou of the Aerodynamics Research Laboratory at Illinois.


Share this story

This story was published August 25, 2020.