Going Green: Manufacturer to Use AE Researchers' Corn Composite Technology
A Texas manufacturer has licensed with the University of Illinois at Urbana-Champaign to use a corn-based structural composite technology that AE Prof. Scott White and affiliate Prof. Nancy R. Sottos first invented about 15 years ago.
Said CBMI Chief Executive Officer Lane Segerstron, who founded the company in 2009, “We are so excited and honored to be able to bring the University of Illinois’ patented technology to the marketplace and have an opportunity to make a positive impact on rural communities while doing our part to help the environment.”
CornBoard™ is a version of wood composite board that uses corn husks and stalks (commonly referred to as corn stover) remaining in the field after corn is harvested. The structural composite is prepared by mixing the fibrous corn component with a polymer matrix, laminating the mixture, and applying heat and pressure.
In contrast to traditional particle board, plywood, or medium-density fiberboard, CornBoard™ developed at CBMI will be repurposing an underutilized biomass material. For every acre of corn grown, (over 86 million acres are grown annually in the U.S), over 4,000 pounds of corn stover are left in the field. Appropriating this biomass material into new and innovative products is an efficient and environmentally conscious means of stewardship.
CornBoard™ is a green technology in that it traps CO2. Typically, when biomass is left to decompose in the field, the CO2 previously captured and consumed by the growing plant is released back into the atmosphere. Conversely, when the corn stover is made into CornBoard™, the CO2 is “trapped” in the material. Sequestering CO2 in CornBoard™ alleviates the contribution of the decomposing biomass towards an increase of CO2 in the atmosphere.
CornBoard™ also provides an alternative to wood products, thereby reducing the demand on a less renewable resource. According to CBMI, just 2 acres of leftover corn stover biomass would produce enough CornBoard™ to build a two story house, supplying the roof decking, flooring, and outer wall sheathing.
CBMI uses a non-toxic resin binder in CornBoard™ production. This
method is a safer and more environmentally conscious choice than a traditional formaldehyde-base binder.
CBMI can produce CornBoard™ in varying densities, allowing for a variety of applications. Due to this flexibility, CornBoard™ is not limited to being a wood composite board replacement, but is also being developed into a variety of products including home and lawn furniture, kitchen cabinets, door cores, and even a full line of longboards.
CBMI is introducing the Zea Home™ Outdoor Furniture Collection, a line of outdoor furniture made from 100% CornBoard™. The first item to be released is an Adirondack chair, an easily assembled piece requiring no fasteners or adhesives.
CBMI also announces the introduction of StalkIt Longboards. These top-of-the-line performance skate boards utilize CornBoard™ for the decks and are endorsed by professional skater Christian Hosoi and professional surfers Alana Blanchard and Bobby Martinez.
In addition, a portion of the profits from the signature “Fallen Soldier Longboard” will be donated to the Snowball Express charity. The Snowball Express charity provides support for the families of United States military personnel lost in the line of duty.
More about CBMI can be learned online at www.cornboardmanufacturinginc.com.